DQA-IOT NB-IOT/LoRa Wireless Current Acquisition Terminal
1 Product Overview
DAQ-LP-CT01 wireless current acquisition sensor terminal is equipped with low power consumption and high sensitivity of the open type transformer, through the principle of electromagnetic induction, the primary side of the large current into the secondary side of the small current, and then used for current monitoring, can be very sensitive to detect the size of the line current, and at the same time to the designated platform server wireless reporting data.
The terminal adopts NB-IOT/LoRa communication mode to overcome the wireless communication block caused by the special environment of the site, greatly simplifying the site deployment time and reducing the construction cost. Device working states include hibernation, collection and storage, and activation and reporting. This terminal is equipped with a wide range of open and close transformers, wide range of current measurement, high-quality magnetic core materials, open and close structure, easy to install, for AC motors, lighting equipment, air compressors, heating ventilation and air conditioning devices, building self-control system, industrial urban network, rural power grid transformation projects and other scenes of current monitoring and collection.
Model | Characteristic Description |
DAQ-LP-CT01 | Battery powered, suitable for low acquisition frequency, external power supply is difficult. NB-IOT/LoRa transmission mode. |
DAQ-GP-CT01 | 220V AC /12V DC power supply, suitable for occasions with high collection frequency or convenient external power supply. 4G transmission mode. |
2 Service Concept
We solemnly promise that:
What you buy is not only the product, but also the meticulous and thoughtful technical support services!!!( =^_^= )
This product, the site only ordinary workers connected to electricity installation! No debugging!
We provide free remote guidance, remote configuration and debugging service, and send the data to the user-specified cloud platform.
Free Internet of Things solution consulting services!
3 Product Features
3.1 Acquisition Characteristics
Collection Type: AC (customizable DC)
Range: 0~50A/100A (other ranges can be customized)
Number of Channels: 1 current collection
Collection Frequency: 1 second to 24 hours. Remote configuration is supported
Accuracy Class: ±2%
Resolution: 0.1A
Maximum Input: 100%(continuous)/150%(1 min)
3.2 Electrical Character
Power Supply Mode: battery power supply or 12V DC / 220V AC
Battery Capacity: 3.6V*19Ah
Standby Power Consumption: less than 5uA@3.6V
Power Consumption: 2~3mA@3.6V
Transmission Power Consumption: 50~100mA@3.6VV
Insulation Impedance: > 100 MΩ (primary / secondary room)
3.3 Communication Characteristics
Antenna Type: External antenna (optional built-in antenna)
Transmission Mode: NB-IOT/LoRa
Communication Protocol: http post Active push
Data Forwarding: any public network server
Data reporting method: 1, when the acquisition current fluctuation is greater than or equal to the set value; 2. Report the current measured value according to the set interval
3.4 Structural Property
Material: PC plastic (enclosure)
Main Protection Level: IP65
Main Body Size:120mm×78mm×50mm
Transformer Probe Structure: open type
Main Mounting Method: wall hanging or screw fastening
Instrument Transformer Probe Mounting Method: suspension mounting
3.5 Work Environment
Ambient Temperature: -25°C~75°C
Humidity: 0~95% (non-condensing)
4 Micropower operating mode
The wireless current acquisition terminal achieves the effect of power saving through intermittent work, the device is in standby state most of the time, and only a small part of the circuit continues to work to maintain the state of micro power consumption. This part of the circuit will ensure the correct operation of the system time and the correct record of the next activation time.
Daily power consumption calculation of the device: Daily working states are divided into: standby state and working state (wake up data collection and upload data through GPRS/NB-IOT), corresponding to different state power consumption data.
5 Product core advantage
Ø Built-in battery, no wiring required.
Ø Simple installation, fast deployment, help the Internet of things project quickly landing.
Ø Support any private Internet of Things cloud platform and configuration software, and provide data protocol docking.
Ø Non-invasive measurement, which does not affect the normal operation of the equipment.
Ø The whole machine is waterproof and moisture-proof design to meet the working requirements in harsh environment.
Ø Support remote configuration parameters and FOTA remote upgrade to minimize the personnel cost of site construction and maintenance.
6 Data Reporting Communication Protocol
6.1 Protocol Parsing Instructions
In HTTP post push mode, users need to provide the URL for receiving http data.
6.2 Protocol docking test
Postman debugging can be used.
6.3 Protocol customization
If you need to customize other docking protocols, such as MQTT, docking configuration software, etc., you can contact the business personnel to communicate.
7 Platform Docking
7.1 Default Platform
The product is connected to our designated industrial Internet of Things platform by default, and the platform interface is as follows:
Computer-side browser interface
Mobile terminal WeChat access interface
7.2 The User Specifies the Platform
Default connection to Telecom iot platform. Other platforms can be customized.
8 Application Cases
Equipment operating status/duration monitoring
Current monitoring
9 Matters Needing Attention
(1) The product supporting transformer probe does not have waterproof function, such as outdoor use, need to be waterproof treatment.
(2) This product has a built-in SIM card, and the annual data fee is about 10~20 yuan according to the reported data frequency.
10 Contact Us
Website: www.daq-iot.com
Tel: +8619936624847
Email: business@daq-iot.com;daqiot888@gmail.com
WhatsApp:+8619936624847
评论
发表评论