Wireless Temperature and Vibration Sensor

无线温度与振动传感器是上海数才物联网有限公司推出的一款用于监测旋转或往复运动机械设备（动力设备）健康状况的边缘智能设备。它采用一体化设计，通过多个传感器实时采集电机数据，并在设备端进行数据学习与分析，并通过NB-IoT、WIFI、4G、5G等通讯方式将电机健康数据远程传输，并将分析结果云端展示。同时具备旋转或往复运动机械设备（动力设备）异常情况预警功能。可适应各种工业环境和网络环境，具有安装简便、损耗率低、误报率低等特点。

重点关注以下情况下的电机/轴承的预测性维护：

1、 油气采集所用的各类泵，包括油井泵、柱塞泵、离心泵等设备；

2、 高压水泵、离心泵、轴流泵、混流泵、螺杆泵、容积泵等设备；

3、 化工厂磁力泵、高压往复泵、螺杆泵、离心泵等设备；

4、 油田抽油泵、柱塞泵、离心泵等设备；

5. 各类风力发电机设备；

6、 其他领域的各类电机/轴承设备；


评论

发表评论

此博客中的热门博文

DAQ-IOT Modbus RTU RS485 Split Core Current Transformer CT AC Analog Signal Coil Sensor DC 12V 5A DC Current Transformer Power On or Off Status Monitoring

图片
DAQ-IOT Modbus RTU RS485 Split Core Current Transformer CT AC Analog Signal Coil Sensor DC 12V 5A DC Current Transformer Power On or Off Status Monitoring 1             Product Overview DAQ-GP-CT485 split core current transformer is a kind of current sensor (transformer) which can convert AC analog signal into RS485 digital signal launched by Shanghai Data Acquisition IOT Technology Co., LTD. The product has built-in 32-bit ARM series MCU and high-precision metering chip, and is a multi-point calibrated current conversion module. It has the characteristics of high precision and fast response. DAQ-GP-CT485 can directly interact with common data acquisition gateways, DTU, programmable controller PLC, and host computer. This product is widely used in AC motor, lighting equipment, air compressor, heating ventilation and air conditioning equipment, building self-control system, equipment OEE open rate, industrial Internet, rural power ...
阅读全文

Construction of Groundwater Monitoring and Intelligent Management and Control System Based on Internet of Things and Digital Twin Technology

图片
(1)  This project uses the Internet of Things, digital twins and numerical simulation technologies to build an automatic control and integrated display service system, construct an underground three-dimensional data base, and realize automatic monitoring of continuous changes in groundwater levels and water quality through a data acquisition platform. The automatic control system and mobile management APP are used to realize remote control of control cabinets and intelligent valves for recharge and backflow operations. The main construction tasks are as follows: (1) Construct an underground three-dimensional data base. According to the project construction requirements, the underground three-dimensional data base is constructed through digital twin technology, and the recharge wells and key equipment and facilities are finely modeled. The dynamic changes of groundwater levels are simulated using numerical simulation technology. (2) Build an automatic control and integrated display ...
阅读全文

DAQ-IOT 4G NB-IOT LoRa WiFi CT Electrification Undamage Installation Wireless Micropower Consumption Current Temperature Measurement Acquisition Terminal

图片
DAQ-IOT 4G NB-IOT LoRa WiFi CT Electrification Undamage Installation Wireless Micropower Consumption Current Temperature Measurement Acquisition Terminal 1             Product Overview   SC-LP-CT LoRa radio current temperature acquisition sensor terminal is equipped with low power consumption and high sensitivity of open transformer, through the principle of electromagnetic induction will a side high current conversion side secondary small current, and then used for current monitoring, can be sensitive to detect the line current size, monitoring circuit current is greater than the product start current, the sensor into the normal working mode, collecting temperature, current and other related data, upload to the acquisition device through wireless communication. If the line is in no load or the load current is less than the starting current, the sensor remains operating with an internal battery supply. The sensor terminal su...
阅读全文