Bluetooth Optical Interface Meter Reading Optical Probe Electricity Meter PDA Support SPP Serial IEC 62056-21

Bluetooth Optical Probe: An optical reading device equipped with Bluetooth (Classic Bluetooth and/or BLE - Bluetooth Low Energy) connectivity.

Supports communication between the PDA and the energy meter via an "optical interface" (type) according to IEC 62056-21.

Item

Specification

Supports

Classic Bluetooth: version 4.1+

Bluetooth Low Energy (BLE): 4.0+ version

Bluetooth communication and connection

Minimum communication distance: 10 metres

Transmissive mode for energy meter reading: data is transmitted directly between the meter and the PDA (meter reading software) without data modification, interpretation or coding by the optical probe itself.

Supports communication rates from 300 to 38400 baud.

Optical interface

Compliant with IEC 62056-21

Minimum 600mAh capacity

Battery

Rechargeable

Continuous use > 8 hours

Size and Portability

Compact design: 32mm (Diameter) x 40mm (Width) x 55mm (Height) x 21mm (Depth)

Rugged and lightweight (<100g), suitable for all types of field environments

Fixing method

LED indicator

Illumination

Ease of operation

Accessories

Training

Wenge backpack soo-in oppositely soo-in logically put americium industrial change support

Built-in strong magnet (N38 or equivalent)

Charge/Power/Bluetooth/Transmit TX/Receive RX status indication

1 metre range white LED for illuminating the meter screen

Easy push button control for power and illumination

USB Type-C charging cable

Shockproof case

See section I.4 "Training".

The supplier shall provide complete French language technical documentation and support, covering the entire process of operation, management and maintenance of the Bluetooth Optical Probe.

评论

发表评论

此博客中的热门博文

DAQ-IOT Modbus RTU RS485 Split Core Current Transformer CT AC Analog Signal Coil Sensor DC 12V 5A DC Current Transformer Power On or Off Status Monitoring

图片
DAQ-IOT Modbus RTU RS485 Split Core Current Transformer CT AC Analog Signal Coil Sensor DC 12V 5A DC Current Transformer Power On or Off Status Monitoring 1             Product Overview DAQ-GP-CT485 split core current transformer is a kind of current sensor (transformer) which can convert AC analog signal into RS485 digital signal launched by Shanghai Data Acquisition IOT Technology Co., LTD. The product has built-in 32-bit ARM series MCU and high-precision metering chip, and is a multi-point calibrated current conversion module. It has the characteristics of high precision and fast response. DAQ-GP-CT485 can directly interact with common data acquisition gateways, DTU, programmable controller PLC, and host computer. This product is widely used in AC motor, lighting equipment, air compressor, heating ventilation and air conditioning equipment, building self-control system, equipment OEE open rate, industrial Internet, rural power ...
阅读全文

Construction of Groundwater Monitoring and Intelligent Management and Control System Based on Internet of Things and Digital Twin Technology

图片
(1)  This project uses the Internet of Things, digital twins and numerical simulation technologies to build an automatic control and integrated display service system, construct an underground three-dimensional data base, and realize automatic monitoring of continuous changes in groundwater levels and water quality through a data acquisition platform. The automatic control system and mobile management APP are used to realize remote control of control cabinets and intelligent valves for recharge and backflow operations. The main construction tasks are as follows: (1) Construct an underground three-dimensional data base. According to the project construction requirements, the underground three-dimensional data base is constructed through digital twin technology, and the recharge wells and key equipment and facilities are finely modeled. The dynamic changes of groundwater levels are simulated using numerical simulation technology. (2) Build an automatic control and integrated display ...
阅读全文

DAQ-IOT 4G NB-IOT LoRa WiFi CT Electrification Undamage Installation Wireless Micropower Consumption Current Temperature Measurement Acquisition Terminal

图片
DAQ-IOT 4G NB-IOT LoRa WiFi CT Electrification Undamage Installation Wireless Micropower Consumption Current Temperature Measurement Acquisition Terminal 1             Product Overview   SC-LP-CT LoRa radio current temperature acquisition sensor terminal is equipped with low power consumption and high sensitivity of open transformer, through the principle of electromagnetic induction will a side high current conversion side secondary small current, and then used for current monitoring, can be sensitive to detect the line current size, monitoring circuit current is greater than the product start current, the sensor into the normal working mode, collecting temperature, current and other related data, upload to the acquisition device through wireless communication. If the line is in no load or the load current is less than the starting current, the sensor remains operating with an internal battery supply. The sensor terminal su...
阅读全文