IEC104 Remote Control and Telemetry Protocol Protocol AI Model Training IEC61850

As a professional provider of IoT data acquisition solutions and an expert in industrial IoT data acquisition, the editor of Shanghai Data Acquisition IOT Technology Co., Ltd， (daq-iot) hereby presents the following introduction, and sincerely welcomes discussions and exchanges. Supported Communication Interfaces: CAN, RS485, Mbus, 4–20mA, Profibus, CC-Link, HART, digital I/O, etc. Industrial Protocols: Modbus RTU/TCP, HJ212, IEC104, DLT645, DLMS, IEC61850, MQTT, etc. Mail:export@daq-iot.com

1. Automatically read the instrument parameters when starting up, and the read parameters will be used as variables to participate in subsequent message polling or message interpretation, such as reading CT transformation ratio, which can participate in a value conversion when interpreting messages;

2. When an instrument collects both YX and YC message frames, it can sense the frame insertion and read the YC data of the device when YX is shifted, and then resume normal polling after completion;

3. When the remote control execution message returns successfully, it senses the immediate insertion of frames to read the YX switch status, ensuring that the switch status is refreshed in a timely manner after remote control;

4. Function variables can command AI to generate professional application code, such as adding virtual point table data to cumulative electricity values: electricity consumption in the past 12 months, electricity consumption in the past 31 days, peak and valley periods in the past year, electricity consumption in the past 24 hours, etc;

5. Capable of perceiving conventionsSOEState changes, prioritizing frame insertion to read and interpret SOE, can interpret SOE content of any message combination and format;

6. Can perceive changes in fault recording status, automatically initiate the reading of fault recording data, and store the recording data in standard international transient data formatcomtradeFormat;

7. You can customize the polling cycle for electricity data, device time intervals, etc,

8. The protocol source code and data point table template are automatically generated simultaneously, and communication interruption virtual points are automatically generated. Multiple interactions can be conducted to delete and add functions. Each time the source code and point table are automatically matched, the English name KEY in the generated engineering point table also brings convenience in JSON packaging; The generated point table has complete attribute features, such as YC type values that can distinguish current, voltage, power, electric degree, and temperature. Professional functions need to set this YC type value in order to perform logical correlation and calculation within the system.